|
|
Joined: Mar 2009
Posts: 393
Member
|
OP
Member
Joined: Mar 2009
Posts: 393 |
I have a project that requires installing a Mule tape for AT&T to pull their fiber.
It is 3" rigid conduit and about 300' with no pull boxes running along the ceiling of a 24' high warehouse with lots of equipment in the way. There is already an existing 50pr in it. Laying in a new conduit would be very difficult due to the location.
I don't think it is airtight enough to use a vaccuum. My fishes are only 200' and 165'. I was thinking about pushing 1 in from each end and somehow entering the conduit to add a poly string to each to make the long pull. The conduit is hung on unistrut so I don't think I can pull apart enough slack to get one of the connectors off. That leaves a pipe cutter or cutting a hole to get in. neither of these sounds like a good idea.
I'm hoping somebody here has better solution.
THANK YOU
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,297
Posts638,858
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
108
guests, and
264
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|