The Conference feature lets you establish a conference call between yourself
and two other parties.
1. Make or answer the first call.
2. Press (Recall, Link or Flash...all the same thing) 2 to put the call on hold.
3. Make the second call.
4. Press Recall *3 to establish the conference.
NOTE: You'll get dial tone THE SAME WAY as you made the 1st call. In other words, you have to have the unit set up on an ata with Line Pool (A) or whatever as the prime line. When you go off-hook, you'll get a line, same thing 2nd time. NOTE: your lines must be in a pool.
If the prime is set as intercom, then you'll have to do F64x to get a line. Again, same for 2nd call.
If you don't understand, call me: 819-564-2303
Last edited by MooreTel; 09/20/16 04:21 PM.
