COMCAST ARRIS TM804 box with NORTEL NORSTAR MICS 0x32 box that was moved from COX to COMCAST. How do I wire teh 66 block.

NORTEL NORSTA 0x32 MICS PRI

Moved Nortel NORSTAR box with 66 block already wired to a new location office. Once I punch down one of the Comcast analog lines Arris modem begins to flash.
All lines are working internally but unable to get the outside COMCAST lines working?
(1) 0x32 MICS NORSTAR NORTEL
1st ICS - left side of the 66 block
3rd ICS - right side of the 66 block

SAFETALK FLASH

•COMCAST MODEM with 5 phone analog lines connected from an ARRIS TM804 box.


•6 Phone lines punched down work internally.


Questions? Equipment was just moved and now we are using a new company for service COMCAST with ARRIS analog box.
1.Do I need to reprogram my 0x32 to use COMCAST lines?
2.Do I need to program the ARRIS box accept the two 0x32 and StarTalk Flash?
3.Do I need to use the ICS2 Amphenol connector?
4.How do I connect the StarTalk Flash wires to the 66 block?
5.How do I connect the ARRIS analog lines to 66 Block?

trying to add layout of what i have but will not accept my image