|
|
|
|
Joined: Mar 2014
Posts: 16
Member
|
|
Member
Joined: Mar 2014
Posts: 16 |
Customer wants to change their outbound caller ID # on a Sprint Protege MTX and telco has told them that the PBX is sending it. Anyone know where to change the outbound CID in the RMP software? I don't believe I've ever programmed this before so I'm not sure the system is even capable of it. Just looking for confirmation.
Thanks.
|
|
|
|
|
Joined: Dec 2007
Posts: 6,839 Likes: 27
Retired Admin
|
|
Retired Admin
Joined: Dec 2007
Posts: 6,839 Likes: 27 |
ICLID (Incoming Call Line Identification) is only available from Telco. You also need an "external device" attached to the CO Lines to collect the ICLID and transfer the information to the Protégé system.
Outbound Caller ID is not possible and is only available and controlled by Telco.
In programming look under C.O. Line Application/ICLID, that is the only programming available.
|
|
|
|
Forums84
Topics94,553
Posts640,115
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
32
guests, and
63
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
