Delete the old backup default.dat file or forced format the SM card before running the backup.
You can power cycle the CTX28, but I would verify that you can ping the system. Try a continuous ping using -t. If you don't get any ping replys then either the IP address of the CTX28 is not default, your laptop is not set to the right network subnet, or the NIC on the CTX28 is bad. If you get some ping responses and some timeouts, I would suspect the GETS1A is bad.
If you do get good ping results, then maybe someone changed the community name in the CTX28.
Last edited by newtecky; 06/16/17 11:02 AM.
