Executone A - T-1 in Trunk group 10 direct to - Executone B - T-1 This has been installed for 3 years and works flawlessly
Executione A - T-1 in TG 9 direct to - - Zultys T-1. I can call from Executone to Zultys and it works fine. I cant transfer a call to Zultys. Something in the transfer sequence interferes with the completion of this. The Zultys does not see digits and doesn't know how to process the call. I used the second executone system to look at what is sent over the T-1 when transferring and all i see are the last 3 digits. That would be fine but the Zultys does not see the digits.
I have LCR in the Executone system.
Last edited by Frankiephones; 11/27/17 01:47 PM.
