|
|
Joined: Apr 2005
Posts: 291 Likes: 1
Member
|
OP
Member
Joined: Apr 2005
Posts: 291 Likes: 1 |
There was a phone on port 1 when it was defaulted, which is why I thought it was not right that I wasn't able to program from there. I have all the dip switch and jumper settings per the manual, this was a test working CPUP in the Adix. I wanted to test the default/load procedure in the shop since I had time, and to test a few spare CPUPs. When I did the procedure I mentioned it loaded everything without error - I know that's not by the book. When I'm back in the shop later I may swap the phone on port 1, try different CPUPs, etc. Thanks for the reply.
On a different note - last week I moved a ZTD system to a new building!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
116
guests, and
328
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|