Look in 10-58 to make sure your local network (VPN etc) is defined. It's probably trying to send the packets via NAT like it's been programmed to do.
192.168.0.0 255.255.0.0 etc if you are on a 172.x.x.x or 10,x,x,x these need to be properly defined.
There is nothing defined in 10-58
Just to be clear before I make this change to the PBX programming
in 10-58 I should have
IP address #1
10.1.10.0
255.255.255.0
IP Address #2
192.168.3.0
255.255.255.0
10.1.10.x is my PBX
192.168.3.x is my remote network
?
