|
|
Joined: Jan 2005
Posts: 15,379 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
OP
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,379 Likes: 13 |
We have a customer using a TDE600. In one department, there are six phones, with five of them having DSS consoles. On all of them, a button is being used as a message waiting button for mailbox 501. One of the phones has a message waiting button for this same mailbox, but it's not on a DSS console.
When this button is pressed from any of the phones, they receive '315: PT' on their display and it rings IP extension 315 at a remote location. I went in and re-programmed these buttons to be message waiting buttons for mailbox 501 remotely by blanking them out and then re-programming them. No change.
We went there yesterday and made the same programming changes on-site. No change either. We gave up and advised the customer to reboot the system after hours, which they did. We still have the same problem. Note, these message waiting buttons have been working fine for years.
I also went into mailbox 501 in their TVA-200 to see if anything strange exists there, but nothing appears to be out of the ordinary. Any suggestions?
Ed Vaughn, MBSWWYPBX
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
65
guests, and
316
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|