IVP8 Rev.2 - Changing Bit from 7 to 8|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Re: IVP8 Rev.2 - Changing Bit from 7 to 8 DD782 #632217 08/26/19 01:52 AM
Joined: Jun 2005 Posts: 2,706 Likes: 7 Irvine, CA US newtecky Member
newtecky Member Joined: Jun 2005 Posts: 2,706 Likes: 7 Irvine, CA US	Actually I was thinking of an LVMU where you can pull the battery to reset. The IVP8 is a but more complicated, although there is probably a short cut if you have a CF card reader. Although I didn't think about the obvious answer which is to use the built-in modem and dial into the voicemail. David Tele Express Business Systems

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Entire Thread
Subject	Posted By	Posted
IVP8 Rev.2 - Changing Bit from 7 to 8	DD782	08/25/19 08:01 PM
Re: IVP8 Rev.2 - Changing Bit from 7 to 8	newtecky	08/25/19 08:50 PM
Re: IVP8 Rev.2 - Changing Bit from 7 to 8	DD782	08/25/19 09:10 PM
Re: IVP8 Rev.2 - Changing Bit from 7 to 8	newtecky	08/26/19 05:52 AM
Re: IVP8 Rev.2 - Changing Bit from 7 to 8	phonemeister	08/26/19 07:14 AM
Re: IVP8 Rev.2 - Changing Bit from 7 to 8	www.telcom1.net	08/27/19 01:54 AM
Re: IVP8 Rev.2 - Changing Bit from 7 to 8	DD782	08/28/19 01:32 AM

Moderated by Carlos#1, phonemeister

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems IVP8 Rev.2 - Changing Bit from 7 to 8