Hello.

I have been trying for the longest time to get vonage(linksys adapter) to work on a network that does not have a DHCP server(or a firewall)

I basically just have a Data T1 going into the network and I have plugged the vonage box into it the network. There is no firewall and no DHCP server.

The internet light flashes but it will never get the phone line to turn on.

I have tried to manual set the IP address, subnet mask, gateway, DNS but still nothing.

Does anyone know if a DHCP server is a necessary to get the vonage to configure or is there any trick to this?

Any help would be appreciated.

Thanks.