|
|
|
|
Joined: Sep 2006
Posts: 276 Likes: 1
Member
|
|
Member
Joined: Sep 2006
Posts: 276 Likes: 1 |
I have a Summit 80 with a PRI. It is set up with two hunt groups with one set to overflow to the other. I have a general mailbox on the 2nd. The system was resetting numerous times of day back in February and March. I upgraded to 4.0.14. That seemed to help until today. By 9:30 this am it reset itself 111 times according to the info. under trace. Since I have never set up a trace I would like to find info on how to do it. Does anyone know of a tech tip or document on tracing? Any comment would be helpful.
tk
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2005
Posts: 15,409 Likes: 18
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,409 Likes: 18 |
I know this is a stretch, but I used to have this issue with XTS systems that received their PRI service from soft switches. There was an issue with the format of the caller ID information (I believe they were sending too many characters) and it was causing this exact same issue. We were able to prove this by asking the service provider to temporarily stop sending call data and the problem went away. I know it doesn't answer your question, but it might help.
Ed Vaughn, MBSWWYPBX
|
|
|
|
Forums84
Topics94,559
Posts640,137
Members49,862
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
18
guests, and
90
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
