|
|
Joined: Feb 2007
Posts: 2
Member
|
OP
Member
Joined: Feb 2007
Posts: 2 |
I replaced a Partner ACS using a Page Pac D20 with an IP Office. What is the best way to determine if the Page Pac 20 was set to line or station port? There is/was a cord going from the Page In port on the Page Pac to the paging port on the Partner. I can't find any documentation that says whether it is line or station port - I thought I programmed it for both but neither works. Want to verify which it should be before going back to site. Or are they even compatible? Thank you in advance.
Last edited by secondshift; 06/18/20 09:49 AM.
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Toner, jkmartin),
150
guests, and
362
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|