We are using several OfficeServ 7400, 7200 and 7200s alle with the latest software update '17.02.28 V5.01. They are all connected together by SPNET.
we are using for all Phone Systems a 4 digit numering plan, for example OfficeServe A would be 1xxx, B would be 2xxx, C 3xxx, D 4xxx etc.

The routing and calling works perfektly but what is realy strange is, when we make a call and then press any digit on the Phone (Digital Samsung Phones or Samsung IP-Phones) the routing is shown.

Please watch this video to see what's happening: http://intern.alpinesparesorts.com/SPNET.MOV

So on IP-Phone 4465 (System D) im calling 1400 (System A), the call goes throught but as soon as I'm pressing a digit the display showes "00011400"
0001 = System ID under 3.3.1 (System D); 1400 is the extention (System A).

Why is this happaning? is it a bug?

Please see configuration:

[Linked Image from intern.alpinesparesorts.com]

[Linked Image from intern.alpinesparesorts.com]

[Linked Image from intern.alpinesparesorts.com]

[Linked Image from intern.alpinesparesorts.com]


The main reason why I'm posting this is because it happenes sometimes also in the Samsung TSP Tapi. So instead of signaling for exaple extention 1400, 00011400 is send.

Thank you for your help

Jonas