For any one looking for Information on "How to Setup Email Notification On Ericsson LG iPECS EMG80 / EMG 100 PBXs"? Here are some notes on how I was able to set it up within each Individual Station on the EMG 100. Once I enter the information below, the PBX was able to send a test email to me.

(2022-01-21)
How to setup Email Notification on iPECS EMG100
Once Logged into the iPECs GUI: (Example: )
Setting Indiviual Extensions VM Email Notification setting
- Go to Station Data -> Station VM Attributes (127) -> Enter Station Range
- Scroll to the bottom section - E-Mail Notification
- Turn on E-Mail Notification: (ON) {Default: ON}
- SMTP Server Address (IP or Domain Name): _________________________­_________
(Example: smtp.gmail.com )
- SMTP Port: _______________ (Example: 587 )
- SMTP Security Connection Options: _________________________________________
<No Security Connection, SSL, TLS>(Example: TLS )
- E-Mail Account ID: ________________________________________________________
(Example: <EnterYourEmailAddress>@gmail.com)
- E-Mail Account Password: __________________________________________________
(Example: <EnterYourEmailPassword> )
- Sender E-Mail Address (From): _______________________________________________
(Example: <EnterYourEmailAddress>@gmail.com )
- Receiver E-Mail Address: _______________________________________________
(Example: <EnterYourEmailAddress>@gmail.com )
- Attach Message Option: ON <Options: On, Off> {Default: ON }
- Delete Message Option: ON <Options: On, Off> {Default: OFF}
Check VM COS
- Go to System Data -> VM COS Attributes (253)
- Line 5: E-Mail Notification -> Options <Disable, Notification Only, Notification and Delete> {Default: Notification and Delete }

Hope this id helpful to some one out there.