Yep. The overflow timer goes in 5 second increments. The default ring cycle for Iwatsu systems is 4 seconds per ring, so you may need to adjust that up a little, and there are other timers that may or may not play well with any setting you choose.

Do the numbering check utility on your data base. I can't ever remember using the Hunt Group ID number as an access number. Default numbers are usually 3 digit on an ADIX, 4 digit in the ECS. You may have a numbering discrepancy causing you problems.

Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.