Does anyone know what the acceptable loop current setting would be to work with the Panasonic KX-TA824?

If a caller hangs up during the outgoing menu message play from the TVA50, the line is not dropped. The TA824/TVA50 hangs up after the outgoing menu message has repeated three times, which is the standard setting.

I have Sonic.net VOIP and the proprietary programmed Grandstream ATA HT701 only has the availability to adjust the Loop Current Disconnect Duration setting in Milliseconds.

I've searched through the TA824 manuals and only found the Loop Current specification data resistances listed.

Outside (CO) Line Loop Limit:
1600 Ω maximum

Terminal Equipment Loop Limit:
PT 40 Ω
SLT 600 Ω including set
Doorphone 20 Ω

Nothing about the Loop Current Disconnect Setting.

Does anyone have any ideas?

Thanks

"Most people don't have a sense of humor. They think they do, but they don't." --Jonathan Winters