Power outage caused a partner ACS v. 3.0 to lose all its programming. (No battery backup
)
Before the phone system was setup not to ring to any extension during the day except the secretaries desk. In night service mode, all the extensions should be able to ring. Went by the manual, setup all the extensions for outgoing access only on the lines during daymode. Put all the extensions in the Night service group and programmed the Night service button. When in night mode the phones are still not ringing and not allowed incoming access to incoming calls. Just wondering if theres anything I'm missing?
EDIT: Found the problem. Do not restrict the line access with #302. Go through Central Telephone Programming and change the line ringing at each ext. to No Ring.
