atcomsystems.ca/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Area Code Conversion

OK. There are several ways to do this.
I would use option 1 as it won't use a RTU port, but either will work.

1. Create a VDN with extension 1111. Assign that VDN a vector. Then set the vector to:

wait 0 sec heaing ringback
route to 9 1 732-XXX-2222 with cov = Y if unconditional
stop

2. Create a virtual or x port station. Then assign an unused cover path set to 1 ring and point 1 to rX. Where X is a open slot on your 'cha cov remote' form. On you 'cha cov remote' form enter the 9 1 732-XXX-2222 number.