Guys, below is a problem I'm having with a customer. When a 7 digit (local) number is dialled the system is injecting XXX (area code) and this is not required or desired. The national CPN prefix is not set in system parameters features, and there is no inserted digits on the route pattern. Anyone have any ideas where else I can check to stop this ?


09:37:27 tone-receiver 01B0306 cid 0x2c4
09:37:27 active station 4242 cid 0x2c4
09:37:30 dial 9123 route:HNPA|ARS
09:37:30 term trunk-group 4 cid 0x2c4
09:37:31 dial 91234567 route:HNPA|ARS
09:37:31 route-pattern 36 preference 1 cid 0x2c4
09:37:31 seize trunk-group 4 member 7 cid 0x2c4
09:37:31 Setup digits XXX1234567
09:37:31 Calling Number & Name NO-CPNumber NO-CPName
09:37:31 Proceed trunk-group 4 member 7 cid 0x2c4
09:37:35 idle station 4242 cid 0x2c4