|
|
|
|
Joined: Apr 2002
Posts: 144
Member
|
|
Member
Joined: Apr 2002
Posts: 144 |
Trying to verify DIDs due to carrier screw-up (stole all channels for data on a voice / data T1) so new T1 being installed.
DIDs are listed by carrier and customer as xxx-00xx. but in database I see them as xxx-10xx. Any idea why that's done that way? I don't see a need to change anything, just trying to understand what's going on.
If it ain't broke, don't fix it!
|
|
|
|
|
Joined: Sep 2005
Posts: 898
RIP Moderator-General
|
|
RIP Moderator-General
Joined: Sep 2005
Posts: 898 |
Hard to say why the difference in records...but it all depends on your dial plan and how many "digits" are being sent by carrier..if they are only sending ( 3 ) then what they are showing on the records doesn't make any difference anyway...as long as the did's work !!!
Good Luck with your new T span....
...bob...
Bob Wells
WellComm, Inc.
"As long as nobody's dead or in jail, it can't be all that bad ! "
|
|
|
|
|
Joined: Apr 2002
Posts: 144
Member
|
|
Member
Joined: Apr 2002
Posts: 144 |
Whenever I tried to change a DID to 00xx, the system changed it to 0. Working with consultant we figured they could delete 7 digits, insert a 1, then send last 3. Not sure why the PBX won't allow a ooxx DID. Possibly something to do with the PBX Attendant being 0.
If it ain't broke, don't fix it!
|
|
|
|
|
Joined: Sep 2005
Posts: 898
RIP Moderator-General
|
|
RIP Moderator-General
Joined: Sep 2005
Posts: 898 |
Not sure which version of Definty your working with..but if you take a look at your dial plan..."0" is probably defined as attnd and single digit..so you can't have a did range of 00xx...it's gonna take the first 0 and route to the attendant.
Bob Wells
WellComm, Inc.
"As long as nobody's dead or in jail, it can't be all that bad ! "
|
|
|
|
Forums84
Topics94,515
Posts639,962
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
