|
|
Joined: Feb 2003
Posts: 4
Member
|
|
Member
Joined: Feb 2003
Posts: 4 |
I'm certified on sx200 Digital light (LW17+) but I'm confronted with an SX200 Analog. Programming is completely difference, and the manual seems to cover everything but.
Would anyone care to give a brief tutorial on programming access?
Specifically, I need to program a virtual or phantom port, to call forward off-property (call for pizza by dialing an extension in the hotel).
I recently read that programming access starts with changing a setting on the scanner card, then "lamp test" "next" ... but where does it go from there? Any help would be greatly appreciated...
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
You can force a console into program mode by setting the switches or dial an access code. Try 5454 or #*#* , if the lamp test button lights you are in, press lamp test to exit. An overlay is used for the different program modes. I'm not sure if a vitual port can be used for what you want, programming the forward will be an issue.
|
|
|
|
|
Joined: Feb 2003
Posts: 6
Member
|
|
Member
Joined: Feb 2003
Posts: 6 |
Apparently, this was configured several years ago, but the client stopped using that feature and no longer knows what the number was, else we might be able to figure out how they did it. Got any add'l tips for us?
|
|
|
|
|
Joined: Feb 2003
Posts: 6
Member
|
|
Member
Joined: Feb 2003
Posts: 6 |
Another helpful tidbit -- we need to track down the proper overlay for programming from that console. Anyone know where we can find one, perhaps on line somewhere?
|
|
|
|
|
Joined: Mar 2001
Posts: 581
Member
|
|
Member
Joined: Mar 2001
Posts: 581 |
the factory inst/programming doc has the overlay. the customer may have one.
|
|
|
|
|
Joined: Mar 2001
Posts: 581
Member
|
|
Member
Joined: Mar 2001
Posts: 581 |
the factory inst/programming doc has the overlay. the customer may have one.
|
|
|
|
|
Joined: Feb 2003
Posts: 6
Member
|
|
Member
Joined: Feb 2003
Posts: 6 |
Unfortunately, it's a hotel and at times we find we're lucky to have people remember what extension they're supposed to dial for the operator. Any suggestions as to where I might look for an overlay (that won't involve my customer)?
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Exactly what overlays do you need? Would they be the ones for the Superswitch SX100/200? If so I have them.
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Mar 2001
Posts: 89
Member
|
|
Member
Joined: Mar 2001
Posts: 89 |
Check your speed dial lists for the number, an easy way is to foward a single line ext. always to a speed dial bin that dials the number you want.
|
|
|
|
|
Joined: Feb 2003
Posts: 4
Member
|
|
Member
Joined: Feb 2003
Posts: 4 |
dtmf, yes, that's exactly what I need. Is there any chance that you could email a copy to me ( [email protected])or fax them to (831) 462-6419? thank you in advance. thank you, thank you thank you.
|
|
|
|
Forums84
Topics94,559
Posts640,135
Members49,862
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (NateBates, Toner),
30
guests, and
77
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
