|
|
Joined: Apr 2003
Posts: 140
Member
|
|
Member
Joined: Apr 2003
Posts: 140 |
Hello -
Is there a way to save and copy the configuration from an SX-200 Digital to an SX-200ML when I upgrade?
Thanks for any advice -
Rich
[This message has been edited by DSU (edited April 08, 2003).]
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Member
|
|
Member
Joined: Mar 2001
Posts: 3,268 |
I don't know for sure----but I know that the ML/EL's programming Forms are a little different than the Digital and it also has more features--my guess is that you can't copy one to the other. However, let's see what the other guys think. I don't see how one set of software could be compatable to the other.
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
There was a time Mitel would do it for you if you purchased it all from them. Other than that, I'm not sure.
|
|
|
|
|
Joined: Mar 2001
Posts: 89
Member
|
|
Member
Joined: Mar 2001
Posts: 89 |
DSU,
No you can't save from the older digitals to the ML or EL. Best way, do a print out and just re-enter your data, the forms are almost identical, some new cos stuff.
|
|
|
|
|
Joined: Apr 2003
Posts: 140
Member
|
|
Member
Joined: Apr 2003
Posts: 140 |
Thanks for the replies!!
One more question -
How would I get a printout of the SX-200D config? Is there a menu option or will I just have to go through each of the forms and save/print?
Thanks again!
Rich
|
|
|
|
|
Joined: Apr 2003
Posts: 10
Member
|
|
Member
Joined: Apr 2003
Posts: 10 |
You did not mention what version of software you are working with. You can print from form 35 I believe. It will print reams of paper if you are not careful. Only print out the COS's that are in use. otherwise you will be waiting around a long time.
|
|
|
|
|
Joined: Mar 2001
Posts: 89
Member
|
|
Member
Joined: Mar 2001
Posts: 89 |
You can pick and choose which blocks to print out, but if your upgrading to ML or EL do a complete print. Do your stations and Trunks first to see which COS numbers you have to print.
|
|
|
|
|
Joined: Apr 2003
Posts: 140
Member
|
|
Member
Joined: Apr 2003
Posts: 140 |
Excellent!!
Thank you very much for the information.
Rich
|
|
|
|
Forums84
Topics94,543
Posts640,074
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
395
guests, and
40
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
