|
|
Joined: Feb 2005
Posts: 1
Member
|
OP
Member
Joined: Feb 2005
Posts: 1 |
We had a power outage and the system went down. When I tried to reboot the system, it gives me these two codes: E.6 and E.3
Can anyone tell me what this is? When I first start the system it gives me E.6 and after I do a master reset it gives me E.3
I would like to know what the problem is, and how to fix it. Thanks.
P.S. The system is a SX 200 Digital (Mitel)
[This message has been edited by espuela79 (edited February 07, 2005).]
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2002
Posts: 1,038 Likes: 1
Member
|
|
Member
Joined: Aug 2002
Posts: 1,038 Likes: 1 |
I believe you need to re-program. sorry.
|
|
|
|
|
Joined: Oct 2004
Posts: 25
Member
|
|
Member
Joined: Oct 2004
Posts: 25 |
If your database is still there, you might need to re-enter the MOSS sheet.
Or your SYS ID Chip is bad...
If no database...sorry.
Kevin
|
|
|
|
|
Joined: Jan 2004
Posts: 80
Member
|
|
Member
Joined: Jan 2004
Posts: 80 |
If you cannot get into the system then the MCC is pooched. I can't find any old documentation that explains each error code and what they mean but the troubleshooting flowchart says if you see those codes to either reseat or replace the MCC.
Hope this helps
|
|
|
|
|
Joined: Jul 2003
Posts: 1,132
Member
|
|
Member
Joined: Jul 2003
Posts: 1,132 |
E. errors generally refer to disk errors. What version of disks are you running? Did you try to boot from backups? On the new system E.8 will come up if your moss password doesn't match programmed info or if your database is gone.
|
|
|
|
Forums84
Topics93,959
Posts637,376
Members49,702
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
