|
|
|
|
Joined: May 2006
Posts: 38
Member
|
OP
Member
Joined: May 2006
Posts: 38 |
Well I'm happy to say my Universal Card with MOH and 2 DTMF/relay modules onboard should be here soon, would have been sooner if the guy had shipped UPS as requested.
As far as I can tell for installation, I can install it in any slot in Bay 1 or Bay 2. For configuration the DTMF cards are automatically handled by the system, as for the MOH, I need to go into Form 01 and add an entry for both the Universal Card and the MOH module. After that I should be good to go following the pin outs for the Universal Card Tip and Ring Assignments...
Aside from strapping in, which should be done first, installing the card, or programming it.
Any suggestions or gotchyas?
Thanks
-Chris
p.s. this is my first hardware install with a mitel.. and i bruse easily so play nice :bow:
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2005
Posts: 2,049
Member
|
|
Member
Joined: Sep 2005
Posts: 2,049 |
You can do either one first .
Let It Be , I live in a Yellow Submarine . SCCE
|
|
|
|
|
Joined: May 2006
Posts: 38
Member
|
|
OP
Member
Joined: May 2006
Posts: 38 |
Thanks OBTW... Can't wait for the card to come in and do the deed *grin* :banana:
|
|
|
|
Forums84
Topics94,305
Posts638,893
Members49,771
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
91
guests, and
29
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
