|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
OK, John, I know you're out there somewhere. (MB?) Setting up external call forward from the cordless night phone. Reg 100, CO to CO connect enable, abbreviated dial access enabled, cos 2 authorized trk to trk connection, reg 4 call fwd options all enabled (3) plus f=1, proceed to be cfwd external, reg 5 abb. dial access, reg 6 outgoing access to trunks, trunk grp 1 reg b=2, send answer, etc. 501-580, reg 1 connect to outgoing trk without 3rd party, reg 2 disconnect super ok. I come off hook on the cordless, dial 60, 55, 10, and hang up. 10 is the bin# for the abb. dial cell. It's entered properly in bin 10, and shows up on *65,10. Calls act like they're forwarding, and ring in the caller's ear, but will not ring the cell. If I have her transfer from the console to the cordless, and it's off-hook,(busy) it rings the cell ok. WTF?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
Oh- i guess the 50 won't call forward externally over loop trunks, have to be ground.
|
|
|
|
|
Joined: Sep 2005
Posts: 2,049
Member
|
|
Member
Joined: Sep 2005
Posts: 2,049 |
Turn on Fake answer super vision if the 50 has that option ! I don't work on 50's so I am just guessing here ! My cowoker does I will ask him in the AM . I don't think GS/LS should matter ! But WTFDIK !
Let It Be , I live in a Yellow Submarine . SCCE
|
|
|
|
|
Joined: Jul 2003
Posts: 1,136 Likes: 1
Member
|
|
Member
Joined: Jul 2003
Posts: 1,136 Likes: 1 |
Was reading the nfo and it say that if you don't have Disconnect Supervision Guaranteed set to yes that the trunks won't connect to each other. Register 2-c set to 1 (501-580).
Like Darrell, I do not work on this system.
Oops, looks like you got that that covered.
|
|
|
|
|
Joined: May 2004
Posts: 336
Member
|
|
Member
Joined: May 2004
Posts: 336 |
I've never been able to get an incoming outside call to external call forward on the 50, internal to external works fine, I don't think it can be done even though the manual reads like it can
|
|
|
|
|
Joined: Nov 2002
Posts: 632
Member
|
|
Member
Joined: Nov 2002
Posts: 632 |
I have been able to call forward using an older model CMP call extend, But the trunks are being handeled by the call extend,the switch is in night mode,the one I have setup transfers to an answering service.Flexible night service would be able to assign particular trunks to different locations ,call CMP and see if they have some of the older units available 800-245-9933
|
|
|
|
Forums84
Topics94,526
Posts640,016
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
120
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
