|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
fifty5footer
Note the 'minimum wires', and I've been in this long enough to tell you that, as an example, the OKI 82 would NOT work 1-1 thru 25-25. There were/are a lot of printers that violated the '232 Standard'. And computers and other 'RS232 standard devices'. Sorry, didn't mean to get pissy, it's just that I've lost some hair trying to interface some stuff! John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
Since you specifically asked for help with the OKI 184 turbo, I just wanted to let you know how we have it setup on one of our lab systems. Straight thru ribbon cable, no jumpers, no loopbacks! Works like a champ!!
|
|
|
|
|
Joined: Aug 2006
Posts: 1,136
Member
|
|
Member
Joined: Aug 2006
Posts: 1,136 |
Okay, I have only done about 200 of these so if you haven't gotten this done yet here you go
Mitel Printer
1 1
3 3
7 7
and in all honesty it will work without pin one most times. On the high speed (serial) board in the printer you may need to turn dip switch four on switchbank two so that the printer will not be looking for voltage. If you don't want to do that then loop 4 and 5 and separately 6,8,20 on the printer end.
|
|
|
|
Forums84
Topics94,581
Posts640,270
Members49,879
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
358
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
