|
|
Joined: Oct 2006
Posts: 3
Member
|
Member
Joined: Oct 2006
Posts: 3 |
Programmed a trunk on a 216 system and it accesses the trunk but doesn't pass audio? Drops the trunk after 3 seconds. I can ring into it and answer but no audio and call drops after 3 seconds. Tried other ports and same thing. Any ideas?
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
Member
Joined: Oct 2004
Posts: 1,057 |
Loop start, ground start?? Bad Co Trunk Card ??
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Make sure you are setting ALL the switches correctly and you are using the correct settings for the card. There are 2 different trunk cards and the switches are not all set the same. And check your port programming. If all else fails, try using the card in a working trunk card's slot. I have seen bad backplanes on analog shelves cause problems in 1 slot with 1 type of card, and no other problems at all. John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
Member
Joined: Aug 2005
Posts: 2,125 |
does the co work at the MPOE?
|
|
|
Forums84
Topics94,532
Posts640,045
Members49,854
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
298
guests, and
27
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|