|
|
|
|
Joined: Jul 2007
Posts: 4
Member
|
|
Member
Joined: Jul 2007
Posts: 4 |
I have an SX-2000 that has only been in service for about 5 months. My users have been getting occasional "called barred" messages when dialing local out of the PRI. I am running a single NSU with two spans running PRI VER [1.6.0.13]. I can not for the life of me reproduce it. I have loaded the NSU, and even did a "hard re-boot", no luck. I have checked all of my system settings on a unit at another location with a very similar setup. HELP!!!!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2006
Posts: 372
Member
|
|
Member
Joined: Sep 2006
Posts: 372 |
Check your maximum dialed digits under the sytem forms, I believe that returns a call barred message. They may be dialing an extra digit.
JimmyV
"Well informed people know it is impossible to transmit the voice over wires. Even if it were, it would be of no practical value" Boston Post, 1865
|
|
|
|
|
Joined: Jul 2007
Posts: 4
Member
|
|
Member
Joined: Jul 2007
Posts: 4 |
The only "Max Digits" restriction is referred to in the COR. and I have it set to unlimited across the board.
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
In nested digits table make sure you don't have "Digits not to Analyze" entry. I would suggest to have "1nnn" digits follow 7 and 011 Unknown. In this case system will collect digits before outpulsing. One more. In circute discriptor check Outpuls ratio.make sure it is not to fast. If you don't want to do that try to Enable " No Overlaping".
|
|
|
|
Forums84
Topics94,515
Posts639,967
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (MooreTel),
293
guests, and
36
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
