Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
No Ring to SLT
#106237 08/07/07 05:14 PM
Joined: Jul 2006
Posts: 18
Member
OP Offline
Member
Joined: Jul 2006
Posts: 18
Gentlemen,
Mr. Patel from the local Knights in called concerning an issue that he is having with his Mitel SX-200.
Extension 102, can make outgoing calls fine.
If you call the room from external or internal the call drops dead with no ringing at the station port.
The other ports on the station card ring with no problems.
Please assist if possible.
Peace,
Dave


[Linked Image from ohiotele.com]
Dayton - Columbus - Cincinnati, Ohio
EMP & Lightning Home Surge Protection
EMP - Click Here!
Re: No Ring to SLT
#106238 08/07/07 05:29 PM
Joined: Aug 2002
Posts: 960
Member
Offline
Member
Joined: Aug 2002
Posts: 960
Is this a 9110-110 card? Sounds like ring trip, need a replacement card.

Re: No Ring to SLT
#106239 08/07/07 06:30 PM
Joined: May 2005
Posts: 1,004
Member
Offline
Member
Joined: May 2005
Posts: 1,004
Yep, or move to an unused port on another card. Replacement is better, as they are so cheap (I'm assuming analog from Mr. Patel). wink

Re: No Ring to SLT
#106240 08/08/07 05:20 AM
Joined: Oct 2004
Posts: 1,057
Member
****
Offline
Member
****
Joined: Oct 2004
Posts: 1,057
That does sound like the classic ring trip sympton.
Let us know if you need any parts!!


www.ResaleSystems.com 24 x 7 Mitel Parts and Free Tech Support
Re: No Ring to SLT
#106241 08/08/07 06:15 AM
Joined: Oct 2005
Posts: 1,078
Member
Offline
Member
Joined: Oct 2005
Posts: 1,078
Quote
Originally posted by [email protected]:
Gentlemen,
Mr. Patel from the local Knights in called concerning an issue that he is having with his Mitel SX-200.
Extension 102, can make outgoing calls fine.
If you call the room from external or internal the call drops dead with no ringing at the station port.
The other ports on the station card ring with no problems.
Please assist if possible.
Peace,
Dave
don't assume its a ring trip pull the cross connect and clip on the that port on the frame
and have someone ring you back or call from the test line to true out inside wiring....

Re: No Ring to SLT
#106242 08/08/07 08:22 AM
Joined: Dec 2005
Posts: 7,056
Moderator-Mitel, Panasonic
*****
Offline
Moderator-Mitel, Panasonic
*****
Joined: Dec 2005
Posts: 7,056
County wide has a valid point, it can be the wiring, the jack with 'green fuzzies', the line cord, or even the phone itself! That said, 99 times out of 100, it is the station card if it is a 9110-110! John C.


When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
Re: No Ring to SLT
#106243 08/08/07 04:09 PM
Joined: Jun 2006
Posts: 123
Member
Offline
Member
Joined: Jun 2006
Posts: 123
Especially in hotels.The jacks get alot of moisture and corrosion that will cause ring trip when the ring voltage comes through.As john says 99 out 100 its the station card! Jason

Re: No Ring to SLT
#106244 08/08/07 04:56 PM
Joined: May 2005
Posts: 1,004
Member
Offline
Member
Joined: May 2005
Posts: 1,004
And the winner is?

Re: No Ring to SLT
#106245 08/09/07 11:26 AM
Joined: Dec 2005
Posts: 7,056
Moderator-Mitel, Panasonic
*****
Offline
Moderator-Mitel, Panasonic
*****
Joined: Dec 2005
Posts: 7,056
ZZZZZZZZZZZZZZZZZZZZZ............. John C.


When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
Re: No Ring to SLT
#106246 08/10/07 08:07 AM
Joined: Dec 2005
Posts: 7,056
Moderator-Mitel, Panasonic
*****
Offline
Moderator-Mitel, Panasonic
*****
Joined: Dec 2005
Posts: 7,056
This should probably be a new post, but here goes. How many Mitel guys on here have only motel experience with Mitel? How many have experience in other user bases with Mitel? You know, doctor, lawyer, indian chief. And setting 1 up for your own company's use doesn't count. John C. (Not Garand)


When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
Page 1 of 2 1 2

Moderated by  DrPbx 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
problem with a new CO line on a Panasonic KX-T30810
by LenShustek - 09/20/20 09:55 PM
Issue with tenants/trunk groups
by EV607797 - 09/20/20 07:46 PM
CenturyLink Rebrands Three Ways.
by dexman - 09/19/20 10:44 PM
SV 9100 CP 10
by teldata1 - 09/18/20 05:10 PM
Need 4 - wire ring coil for C4A ringer
by Ray Mar - 09/18/20 04:25 PM
Who's Online Now
19 members (hbiss, C5Z, hitechcomm, LenShustek, newtecky, Professor Shadow, Meyery2k, Hofman telekom, EV607797, Bob3470, metelcom, Touch Tone Tommy, nortelvoip, Yoda, justbill, teldata1, Ruben, JBean3329, phonman123), 137 guests, and 42 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,952
Posts637,230
Members49,346
Most Online5,661
May 23rd, 2018
Today's Birthdays
Corrupted DNA, mylos, TCiComm
Newest Members
Ray Mar, NKol423, Rob McKay, s0397, Craypaz
49346 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 31
teleco 12
hbiss 9
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners