sundance-communications.com/forum Forums TDM Business Telephone Systems Mitel Telephones & Systems capturing text in telnet

Thanks for the reply, but I don't get the "Display Option" you are referring to. All I get is "Print All," "Print Option," under Form 32.

I can't seem to get the data to print to screen.

Not sure if this matters but I am using the "Serial" option under sessions instead of "RAW" and it seems to work fine. "RAW" requires a host to connect to and my SX-200 isn't on the network.

I should also mention that might mitel sx-200 is an older model

Are you using a modem???? Since you were using puTTY I thought it was an ICP. That being the case you are not going to be able to capture text unless you get someone to hook up your modem on site to the SMDR port then walk them through the process on the console to dump your program. If you do this you may need to add a null modem connector in the modem cabling out of the SMDR port to make it happen