|
|
Joined: Aug 2006
Posts: 1,136
Member
|
OP
Member
Joined: Aug 2006
Posts: 1,136 |
Working on a Verizon PRI in Dayton Ohio. Everything up and synced but dial 0 and 0+ calls not routing - dead ending into message asying either "you must dial 1 before placing this call" or "you must dial a 1 or 0 before placing this call" . 1+ and toll free working fine. when tier 2 traps the call they say we are not sending the 0, but smdr monitor shows all digits being sent.
Verizon ISDN desk is also saying there is no way they are dropping the 1. I thought at first call was not routing, but have done CPN substitution and that is working fine. i also used Modified digits to try inserting an extra 0, and inserting PIC code but it's not making any difference.
Has anyone run into this before or have any ideas of anything I can try. I don't want to send tech to the property until I am sure it's not PBX.
Thanks
Dane
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
Most of the time providers are not allow to dial 0 on T1s. You have to put a request for it.
|
|
|
|
|
Joined: Aug 2006
Posts: 1,136
Member
|
|
OP
Member
Joined: Aug 2006
Posts: 1,136 |
They say they are not even seeing the 0 when they capture the digits.
|
|
|
|
|
Joined: Apr 2003
Posts: 104
Member
|
|
Member
Joined: Apr 2003
Posts: 104 |
try to add an additional 0 in the modified digits table
|
|
|
|
|
Joined: Aug 2006
Posts: 1,136
Member
|
|
OP
Member
Joined: Aug 2006
Posts: 1,136 |
As in my original post I tried that - to no avail. I think it is a carrier problem, but they swear there is no way they could delete the 0 (yeah - like I believe that) but I wanted to examine all possibilities before getting a tech out to the property to verify it from there.
|
|
|
|
|
Joined: Jul 2003
Posts: 1,132
Member
|
|
Member
Joined: Jul 2003
Posts: 1,132 |
Are they doing any call by call services? could be 0 and 1 are restricting or unrestricting callerid
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
I never saw that any T1 providers will allow you to dial a PIC code but 0 it's usually their problems. You have to talck to the switch tech.
|
|
|
|
|
Joined: Aug 2006
Posts: 1,136
Member
|
|
OP
Member
Joined: Aug 2006
Posts: 1,136 |
1 + routes fine. The MAC people and all the others are saying everything is programmed fine and that they are not receiving the zero - I have this one programmed EXACTLY like a bunch of others and they are working fine so I am going to open up a ticket to have the tech from Verizon go to the site and dial directly off the circuit. Just wanted to make sure I wasn't missing anything.
Thanks for all the input. I will try to remember to let y'all know what it was.
|
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
Is it the embedded PRI or a PRI card??
|
|
|
|
|
Joined: Aug 2006
Posts: 1,136
Member
|
|
OP
Member
Joined: Aug 2006
Posts: 1,136 |
|
|
|
|
Forums84
Topics94,295
Posts638,838
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
