|
|
|
|
Joined: Jun 2005
Posts: 67
Member
|
OP
Member
Joined: Jun 2005
Posts: 67 |
Had a bad Bay Controller III card, got a new one and my bay 3 still won't come up with the new one. I can take the Bay Controller from bay 2 and put into Bay 3 and it works great. Both piggy backs are working fine. I tested them. The guy I got the Bay Controller from said I need to download software onto the new Bay controller III. I have no idea how to do this and quiet frankly I have never heard of it. Any suggestions or help would be greatly appreciated.
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2008
Posts: 7
Member
|
|
Member
Joined: Sep 2008
Posts: 7 |
The BCCIII is "upgraded" when it establishes a link with the main cabinet contriller, it takes approx. 15-20 minutes for it to upgrade, if you power cycle or reset the BCCIII during this time its toast and the only recovery is to try to reflash it ot replace it, I've had a 50/50 experience on the reflash.
|
|
|
|
|
Joined: Jun 2005
Posts: 67
Member
|
|
OP
Member
Joined: Jun 2005
Posts: 67 |
Thanks, I finally go it up. I took the piggy back off of it and put it in the main cabinet hoping that it would load or upgrade the software. I let it run its course like you said and it came up. For some reason no matter how long i let it run in bay 2 or 3 it would not upgrade. The main cabinet, bay 2 & 3 are all working great now. I guess it was another one of those "Magic" things in this business.
Thanks for the help!
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Gary S.),
196
guests, and
344
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
