|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2011
Posts: 2
Member
|
|
Member
Joined: Oct 2011
Posts: 2 |
I as well, am trying to program my sx-50 for a call forwarding number. I tried setting up an abbreviated dialing number but for some reason it did not work! So, could I also get that information that you have been emailing to others please!!
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
If you have the manual, check section 105. Basically, you create a dummy extension that is 'call forward always' using a system abbreviated number. Then anything sent to that extension via C/F or direct transfer will go to the phone number. IF the extension is allowed to C/F, AND unsupervised trunk to trunk connection is allowed.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Oct 2011
Posts: 2
Member
|
|
Member
Joined: Oct 2011
Posts: 2 |
I was going thru the function keys trying to locate something and now I have EQP-BSY on the display! How can I get that removed? Also, I have a manual for programming but not sure how to get the commands menu..........
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Equip-busy: *32 that clears all alarms and busy-outs.
If you have the manual and can't figure out how to get into programming, you probably better back off and get a smidgin of training.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Jul 2011
Posts: 12
Member
|
|
Member
Joined: Jul 2011
Posts: 12 |
Can I get the same information for a SX-200? I want to be able to have some dial an extention and it rings my cell phone. I have access to the menu to log in and full access to the system.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Check the 'call forwarding' feature in section 105 of the manual.
The call forwarding in the 200 (Which 200?) is somewhat different. Determine which 200 you have and start a new thread. In the Mitel forum just click on 'post new topic', upper right section of any thread in the Mitel forum.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: May 2011
Posts: 3
Member
|
|
Member
Joined: May 2011
Posts: 3 |
I would also like to get the info about call forwarding. sx-50 to a call center.
Tzmandan
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Check the 'call forwarding' feature in section 105 of the manual. All the programming to enable it and the user instructions to do it are in there.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Tzmandan, You've got mail.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Forums84
Topics94,511
Posts639,924
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
292
guests, and
44
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
