|
|
Joined: Jun 2010
Posts: 9
Member
|
OP
Member
Joined: Jun 2010
Posts: 9 |
Hi, Please advise me of how can i make an dummy extention call forward to a long distance number?? I have created the dummy extention already. I tried to dial 56 (call forward= Follow me) after dial tone but it gives me busy signals does not allow me to enter the LD phone number. please help!!! Thanks In Advance To Everyone!! 
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
United States LD or another country?
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Call Forward External can only forward to System Speed Dial numbers in an SX50.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Jun 2010
Posts: 9
Member
|
|
OP
Member
Joined: Jun 2010
Posts: 9 |
Thaks for quick reply.
I need both US LD and International.
Can You please explain how its done to make speed dial and forwarding as well>
Thanks a Bunch!!!
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Jun 2010
Posts: 9
Member
|
|
OP
Member
Joined: Jun 2010
Posts: 9 |
I have received your email. I really appreciate your help. i got it to work now!! thanks much!!!
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Our pleasure! Thanks for getting back to us, nice to know when we 'get the job done'!  John C
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Jul 2011
Posts: 5
Member
|
|
Member
Joined: Jul 2011
Posts: 5 |
I would love to know the steps too. Haven't been able to figure this out and don't want to mess with it too much.
Thank you
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Alok Shah, check your mail.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Oct 2011
Posts: 2
Member
|
|
Member
Joined: Oct 2011
Posts: 2 |
I would also like to get the info about call forwarding.
Thank you,
Mike
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Oct 2011
Posts: 2
Member
|
|
Member
Joined: Oct 2011
Posts: 2 |
I as well, am trying to program my sx-50 for a call forwarding number. I tried setting up an abbreviated dialing number but for some reason it did not work! So, could I also get that information that you have been emailing to others please!!
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
If you have the manual, check section 105. Basically, you create a dummy extension that is 'call forward always' using a system abbreviated number. Then anything sent to that extension via C/F or direct transfer will go to the phone number. IF the extension is allowed to C/F, AND unsupervised trunk to trunk connection is allowed.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Oct 2011
Posts: 2
Member
|
|
Member
Joined: Oct 2011
Posts: 2 |
I was going thru the function keys trying to locate something and now I have EQP-BSY on the display! How can I get that removed? Also, I have a manual for programming but not sure how to get the commands menu..........
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Equip-busy: *32 that clears all alarms and busy-outs.
If you have the manual and can't figure out how to get into programming, you probably better back off and get a smidgin of training.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Jul 2011
Posts: 12
Member
|
|
Member
Joined: Jul 2011
Posts: 12 |
Can I get the same information for a SX-200? I want to be able to have some dial an extention and it rings my cell phone. I have access to the menu to log in and full access to the system.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Check the 'call forwarding' feature in section 105 of the manual.
The call forwarding in the 200 (Which 200?) is somewhat different. Determine which 200 you have and start a new thread. In the Mitel forum just click on 'post new topic', upper right section of any thread in the Mitel forum.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: May 2011
Posts: 3
Member
|
|
Member
Joined: May 2011
Posts: 3 |
I would also like to get the info about call forwarding. sx-50 to a call center.
Tzmandan
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Check the 'call forwarding' feature in section 105 of the manual. All the programming to enable it and the user instructions to do it are in there.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Tzmandan, You've got mail.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Feb 2012
Posts: 13
Member
|
|
Member
Joined: Feb 2012
Posts: 13 |
Thank you already for any Information.
I have it working if somebody calls from a internal extension, but if somebody calls from outside. I think where I am stuck is "unsupervised trunk to trunk connection".
-Marc
|
|
|
|
|
Joined: Aug 2012
Posts: 1
Member
|
|
Member
Joined: Aug 2012
Posts: 1 |
I am also looking for detailed instructions on external call forwarding to a tool free number. The external forward and always forward command is not in my book?
|
|
|
|
|
Joined: Mar 2017
Posts: 1
Member
|
|
Member
Joined: Mar 2017
Posts: 1 |
I am also looking for help in setting up call forwarding on sx50 to an external off site number. Please help.
|
|
|
|
|
Joined: Feb 2006
Posts: 1,716
Member
|
|
Member
Joined: Feb 2006
Posts: 1,716 |
The information you need is not just a user manual look up. There are programming items that must be enabled for this to work properly. I highly suggest that you locate a local Mitel dealer in your area and have them visit your site to make sure the programming is enabled for this to work.
Programming details is beyond the scope of this forum.
I am locking this thread as there is no forward going information that can be added.
Rcaman
Last edited by Rcaman; 03/24/17 10:09 AM.
Americom, Inc.
Where The Art And Science Of Communications Meet
|
|
|
|
Forums84
Topics94,287
Posts638,793
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
152
guests, and
409
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
