|
|
Joined: May 2005
Posts: 1,006
Member
|
OP
Member
Joined: May 2005
Posts: 1,006 |
On the ICP the Superconsole 1000 only works on the main control card (red-orange)pair, right?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
That's the port that's pre-programmed for it (not sure on the pinout without the guide in front of me), but I believe that you should be able to program it on any digital port.
The default ICP only comes with two digital ports (the idea is for you to use IP-phones for the other ports). SS430/4150 have been phased out as sub-attendants, also. You'll need to use an IP-phone if you want sub-attendants.
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
OP
Member
Joined: May 2005
Posts: 1,006 |
I'm using IP pgones as sub-attendants, so maybe I could use the second digital port for the console? Thanks
|
|
|
|
|
Joined: Nov 2006
Posts: 196
Member
|
|
Member
Joined: Nov 2006
Posts: 196 |
You can put the console (or any compatible digital set on either port. They punch down on the WH/BL and WH/OR pairs.
Harry at Telecom Equipment & Consulting Specializing in Mitel systems for the Hotel/Motel industry www.TECHarry.com
|
|
|
|
|
Joined: Jun 2010
Posts: 136
Member
|
|
Member
Joined: Jun 2010
Posts: 136 |
the console goes on the r/bl or r/org pair on the on-board card on the ICP, or you can use it on a digital port if you're using a per node with digital card
Or use the 5540 IP console
|
|
|
|
|
Joined: Nov 2006
Posts: 196
Member
|
|
Member
Joined: Nov 2006
Posts: 196 |
Oops! Sorry for the typo... you're right, of course, its RD/BL and RD/OR
Harry at Telecom Equipment & Consulting Specializing in Mitel systems for the Hotel/Motel industry www.TECHarry.com
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
OP
Member
Joined: May 2005
Posts: 1,006 |
I moved it to the RD/BL pair and re-programmed. Works just fine, thanks!
|
|
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
180
guests, and
407
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
