|
|
Joined: Jul 2010
Posts: 4
Member
|
OP
Member
Joined: Jul 2010
Posts: 4 |
Hi I need to know how I can see the directory number which is used in Mitel SDK sample "MiPhoneTest123" in add command? the read me besid of sample is below: --- add command: The format is add [DN] [ipaddress for 3300] where: [DN]: the Directory Number of the softphone [ipaddress for 3300]: the IP Address of the ICP3300 which the softphone DN is programmed in. For Example: add 8200 10.37.201.20 This command is used to register the softphone with the [DN]. The add command is used once and then user needs to terminate this program.
Thanks a lot
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
Member
Joined: Aug 2005
Posts: 2,125 |
I believe that this would be the extension that you are trying to create. DN == Directory Number == Dialed Number == Extension Number.
|
|
|
|
Joined: Jul 2003
Posts: 1,132
Member
|
Member
Joined: Jul 2003
Posts: 1,132 |
For Example: add 8200 10.37.201.20 8200 would be the DN in this example
|
|
|
|
Joined: Jul 2010
Posts: 4
Member
|
OP
Member
Joined: Jul 2010
Posts: 4 |
Thanks Is DN undependent number? Is it appear on phone when I call by add command? May you help me know recording steps? I will appreciate you if you help me
|
|
|
Forums84
Topics94,297
Posts638,867
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
1 members (RM SYSTEMS),
100
guests, and
317
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|