|
Joined: Sep 2010
Posts: 23
Member
|
Member
Joined: Sep 2010
Posts: 23 |
Hi! I'm new, and new to Mitel. Please bear with me, and don't hit your forehead too hard when reading this...
I'm getting an alarm on the console of the SX200 ML who's upkeep I've been put in charge of.
In maintenance, show alarms all shows this under PCM Channel Alarms Display:
BAY: # Devs # Unavail Percent Alarm Bay# 3 ââ€â€š 32 ââ€â€š 32 ââ€â€š 100% ââ€â€š Major
Minr Major Critical 0% ââ€â€š 20% ââ€â€š 0 ââ€â€š
Which would be pretty bad... If we had a 3rd bay. The system only has 2 Bays, the main + one peripheral bay. How do I tell the system it only has bays 1 & 2?
Bay 1 connects to bay 2 via a BCC II / fibre connection. 2nd fibre port has no connection (as it should be).
Thanks in advance,
Tod.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jul 2003
Posts: 1,136 Likes: 1
Member
|
Member
Joined: Jul 2003
Posts: 1,136 Likes: 1 |
You need to change the thresholds for bays and system in maintenance.
|
|
|
|
Joined: Sep 2010
Posts: 23
Member
|
Member
Joined: Sep 2010
Posts: 23 |
John,
Thanks! Deleted step by step that shouldn't appear in this area, as Johnp pointed out. Acceptable would be something like 'I changed alarm levels to 100% in the offending bay(s)'. Remember that we have folks here that could inadvertently hose their system trying to correct something. (Or sabotage a system for whatever reason) Please reread the posting rules. Or PM me or any other MOD for clarification.
Thanks!
Tod.
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Member
|
Member
Joined: Mar 2001
Posts: 3,268 |
Do you have a PRI on this system??
|
|
|
|
Joined: Jul 2003
Posts: 1,136 Likes: 1
Member
|
Member
Joined: Jul 2003
Posts: 1,136 Likes: 1 |
minor 100 major 100 critical 0 should do the trick
|
|
|
|
Joined: Jul 2003
Posts: 1,136 Likes: 1
Member
|
Member
Joined: Jul 2003
Posts: 1,136 Likes: 1 |
When looking at system values, note the level causing the alarm and bump up the values enough to cover but not disable alarms.
|
|
|
|
Joined: Jul 2003
Posts: 1,136 Likes: 1
Member
|
Member
Joined: Jul 2003
Posts: 1,136 Likes: 1 |
Please, one other thing. If you would in the future not post exact procedures rather just a more general statment saying I set the levels for minor and major to 0%
There are people on this board who make a living off their ability to install, program and maintain these systems. To protect our interests we ask very little from the members here and this is one of those things.
Thanks in advance for your efforts.
|
|
|
|
Joined: Sep 2010
Posts: 23
Member
|
Member
Joined: Sep 2010
Posts: 23 |
John,
Sorry about that. I will generalize more in the future. I've had that sort of procedural documentation beaten into me, but I completely see your point.
100 100 0. Gotcha, thanks again. I'm still wondering though, this doesn't actually tell the system there is no 3rd bay, it just says to ignore bay 3 alarms, correct?
JWRacedog,
Negative on the PRI. I have the following in bay 1:
LS/GS TRUNK CARD DIGITAL LINE CARD ONS LINE CARD ONS LINE CARD
and the following in bay 2:
ONS LINE CARD ONS LINE CARD ONS LINE CARD ONS LINE CARD ONS LINE CARD ONS LINE CARD
No bay 3, of course.
This is a small hotel, less than 100 rooms, one of 2 owned by the same people. They didn't see any need to get rid of the POTS lines.
Thanks both! Tod.
|
|
|
|
Joined: Jul 2003
Posts: 1,136 Likes: 1
Member
|
Member
Joined: Jul 2003
Posts: 1,136 Likes: 1 |
Correct just hidden. You will find that phantom hardware can be useful swapping sets around, or if a number is needed to do something out of the ordinary.
|
|
|
|
Joined: Sep 2010
Posts: 23
Member
|
Member
Joined: Sep 2010
Posts: 23 |
John,
Thanks again.
Follow-up:
I forgot to set the system thresholds. Went back, did that, and all is right with the alarms. Now to tackle nastier issues...
Have a day! Tod.
|
|
|
Forums84
Topics94,494
Posts639,872
Members49,836
|
Most Online5,661 May 23rd, 2018
|
|
1 members (nortelvoip),
219
guests, and
35
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|