|
|
|
|
Joined: Aug 2009
Posts: 11
Member
|
OP
Member
Joined: Aug 2009
Posts: 11 |
I have a SX2000 that does not allow connection thru the robotic modem. Modem is good and set correctly. It has been sometime, but I believe there was a command line you could use to reset and clear this problem. Is that correct?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2008
Posts: 392
Member
|
|
Member
Joined: Sep 2008
Posts: 392 |
Does it work with a terminal/laptop connected to the port? The modem serial port has to be running at the same rate as the 2k port. If you attach your laptop to the modem and enter AT&B1, AT&W0 while at 9600 baud it will set the port to 9600. Switch on the modem should be set to load NVRAM and not factory defaults too.
|
|
|
|
Forums84
Topics94,285
Posts638,782
Members49,766
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
76
guests, and
178
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
