|
|
Joined: Dec 2010
Posts: 1
Member
|
OP
Member
Joined: Dec 2010
Posts: 1 |
Guys this is my first post but I have been reading a lot. I have MicroCall call accountting software. I had this setup on a PC and it was running fine until last week. The PC is dead so I thought no big deal I will setup on a new PC. So I reinstalled MicroCall but I can not get the data collection to work I'm using the recommended setting from the help file for the IP setting 10.22.161.1 port 1752. When I look in the MicroCall error log I get TCP/IP Server 10.22.161.1:1752 Connection Refused. Is there some place on the SX-200ICP I can look to see if the port is set to 1752 or something else. I know this thing works I just need to figure out the correct setting.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Start with Form 34. That should give you the info you need to look for the IP setting. If you don't know where it is, you need to contact a Mitel certified tech. Messing around in the forms (Deep Progamming) can get you, and/or the system, in serious trouble!
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Joined: Nov 2004
Posts: 290
Member
|
Member
Joined: Nov 2004
Posts: 290 |
try this range 61320 to 61328 these ports are normaly used for hotel interfaces
|
|
|
|
Joined: Feb 2010
Posts: 339
Member
|
Member
Joined: Feb 2010
Posts: 339 |
To my knowledge port 1752 is for the 3300ICP not the 200ICP. Ports 61320 - 61328 are the data ports for the 200ICP if you can't connect to the printer port for the SMDR.
Jon
"It is better to keep your mouth shut and appear stupid than open it and remove all doubt"
Mark Twain
|
|
|
|
Joined: Jun 2008
Posts: 25
Member
|
Member
Joined: Jun 2008
Posts: 25 |
Is the ICP an MX or CX Controller?
|
|
|
Forums84
Topics94,299
Posts638,875
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
111
guests, and
305
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|