|
|
|
|
Joined: Jul 2010
Posts: 185
Member
|
|
Member
Joined: Jul 2010
Posts: 185 |
wake-up calls are somehow transferring to room 220. It seems like they go to the appropriate room they were set for plus then also go to room 220.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Check Command 100, Register 10, Bit C. Bet 2 things.
1. Ext 220 is the first ONS port in the system!
2. Bit C is set to 3!
Read up on automatic W/U with RAD in section 105.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Feb 2008
Posts: 63
Member
|
|
Member
Joined: Feb 2008
Posts: 63 |
I have run into this problem several times. I had a RAD connected to the first system ONS port. Ext 100. For no reason it would start ringing a room instead of the RAD. My cure was to change programming to wakeup with a tone and then change it back to the RAD. I think Mitel admitted to having a glitch in the software but this all happened around the time the SX50 was being discontinued and they were not interested in trying to fix it.
This system is still in service and about every 6 months I get a call that it is happening again.
|
|
|
|
Forums84
Topics94,524
Posts640,006
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
221
guests, and
39
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
