|
|
|
|
Joined: Nov 2004
Posts: 290
Member
|
|
Member
Joined: Nov 2004
Posts: 290 |
you all makeing my head hurt
Q 1 Can I go from the Tel machine remote port straight into the network by-passing the Ipocket using plid 61328?
No. the remote port on the( i assume Tel electronic CA )is a rs232 port to pms
Ipocket could be used for smdr input to the CA
most PMS ive seen all interface rs232
mitel pms rs232 via ipocket
best use ipocket or printer port for call accomting smdr
tc/ip to ipocket for pms ckeck in/out
tc/ip to ipocket for VM check in /out
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2008
Posts: 392
Member
|
|
Member
Joined: Sep 2008
Posts: 392 |
It would be easier to change the IP address of the 200ICP and the addresses of the phones and reboot.
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
The Mitel is default, and the 5 IP phones are in the Mitel sub-net. The voice mail ipocket is .3 and the pbx ipocket is .4. The router has been changed to 1.245, and is there to allow the pms company access through the internet. I can see through maint that the voicemail is "talking", and when the pbx ipocket is powered it's "talking", but won't pass data unless un-powered. Will double-check protocols today. Thanks for your help.
|
|
|
|
|
Joined: Jul 2003
Posts: 1,136 Likes: 1
Member
|
|
Member
Joined: Jul 2003
Posts: 1,136 Likes: 1 |
It would also help to know the exact type of system mx, cx, cxi.
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
|
|
|
|
Forums84
Topics94,515
Posts639,963
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
