|
|
Joined: Oct 2004
Posts: 1,057
Member
|
OP
Member
Joined: Oct 2004
Posts: 1,057 |
We have an SX200 MX Controller running several cabinets, and a PRI card. The end user has had several problems in the past with PRI cards, and would prefer to use an NSU instead.
The problem is that once we get more than 30-35 simultaneous calls up through the NSU, all callers start to hear crackling and interference. We've tried choosing trunks 1 thru 46, and also 46 thru 1, but still have the same results. Using the same CIM connections, the PRI card works fine 100% of the time.Any suggestions?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 370
Member
|
|
Member
Joined: May 2005
Posts: 370 |
Alex Kroger
Pinnacle Communications Corp
Mitel/Hitachi
Nationwide Hospitality Provider
|
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
OP
Member
Joined: Oct 2004
Posts: 1,057 |
We've got a Quad DSP installed, and I would've expected no connection at all vs. noise?!?
|
|
|
|
|
Joined: Mar 2010
Posts: 77
Member
|
|
Member
Joined: Mar 2010
Posts: 77 |
Embedded card in controller.
|
|
|
|
|
Joined: Feb 2010
Posts: 339
Member
|
|
Member
Joined: Feb 2010
Posts: 339 |
Second Mingo... Have had numerous problems with PRI cards and NSUs but haven't had an issue (yet) with the embedded. Of course if you are out of MMC slots disregard previous transmission.. LOL!
What DSP package do you have selected in Form 4? Believe it or not had an issue with this before. It caused weird problems.
Jon
"It is better to keep your mouth shut and appear stupid than open it and remove all doubt"
Mark Twain
|
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
OP
Member
Joined: Oct 2004
Posts: 1,057 |
Because of the configuration, the 2 MMC's are being used for expansion.
|
|
|
|
|
Joined: Feb 2010
Posts: 339
Member
|
|
Member
Joined: Feb 2010
Posts: 339 |
Did you check option 132 in form 4?
Jon
"It is better to keep your mouth shut and appear stupid than open it and remove all doubt"
Mark Twain
|
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
OP
Member
Joined: Oct 2004
Posts: 1,057 |
It's set to Analog 1, and we have a Quad DSP installed. According to the chart, we should be able to support the config. we have programmed. The crazy part is that it works fine with the PRI Card.
|
|
|
|
|
Joined: Mar 2010
Posts: 77
Member
|
|
Member
Joined: Mar 2010
Posts: 77 |
You may want to put a cheap adtran csu in front of the pbx I would also check the status of the circut and see if you are taking any slips.Usually if you are picking up static on a pri you will see some slipping.
You may aslo want telco to intrusive test the circut after hours and see if they see an issue.
|
|
|
|
Forums84
Topics94,289
Posts638,797
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
