|
|
Joined: Aug 2002
Posts: 1,070 Likes: 1
Member
|
OP
Member
Joined: Aug 2002
Posts: 1,070 Likes: 1 |
I am working on getting a PRI working on a 200EL that doesn't have a PRI license (0 digital links).
The Adtran Atlas 550 can convert the PRI to T1 and pass calls through. I have this working perfectly on a 200Light LW 15 for years.
I copied my programming over to the 200EL LW19 but the Atlas T1 will not handshake with the Mitel. There are alot clock slips.
The Mitel is set for D4/AMI and there are no alarms on the Mitel. Only the Adtran Atlas is showing ERROR with alot of clock slips
Adtran tech support confirms all of my settings are good but it's the Mitel side I think that needs some fine tuning.
In the long run the Atlas is more stable than the Mitel PRI card so I am hopeful I can get this going with some help!
Anyone else run into this problem.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
Is the clock set properly in form 44?
The clock on the Main Control Card could be bad.
|
|
|
|
|
Joined: Aug 2002
Posts: 1,070 Likes: 1
Member
|
|
OP
Member
Joined: Aug 2002
Posts: 1,070 Likes: 1 |
thanks, fred.
form 44 is set to:
primary clock source: Bay 3, slot 6
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
But is the T1 with the problem in 3/6? And tell me it's REALLY in slot 11 and 6 is empty.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Aug 2002
Posts: 1,070 Likes: 1
Member
|
|
OP
Member
Joined: Aug 2002
Posts: 1,070 Likes: 1 |
bay 3, slot 6, it's a light cabinet
i think i figured it out: set the line coding on the Mitel to AMI&ZCS in form 42 and it sync'd up good, no slips, no errors.
|
|
|
|
Forums84
Topics94,282
Posts638,762
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
65
guests, and
195
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
