|
|
|
|
Joined: May 2007
Posts: 218
Member
|
|
Member
Joined: May 2007
Posts: 218 |
Couple of questions for an Mitel EL 19 3.2 SW:
Can you put a PRI module on a BCC 3 in the main control cabinet?
If yes, what is it's IP address (is it 192.168.1.1)?
How do you connect to it with IMAT?
Having some trouble with this and the THB is very vague about how to do this.
All comments welcomed and TIA!
Located in Southern California.
Mitel, Avaya, Nortel and Hitachi Products and services for Hospitality and Business sectors. Tel: 1-800-329-7971
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2010
Posts: 339
Member
|
|
Member
Joined: Feb 2010
Posts: 339 |
As far as I know the EL will only accept the PRI card in either the Main or PER cabinets. The THB for LW19 doesn't even mention a PRI module.
Jon
"It is better to keep your mouth shut and appear stupid than open it and remove all doubt"
Mark Twain
|
|
|
|
|
Joined: Jul 2003
Posts: 1,136 Likes: 1
Member
|
|
Member
Joined: Jul 2003
Posts: 1,136 Likes: 1 |
It would only be a T1 module if put on the BCCIII. For PRI, you need the card.
|
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
As mentioned, while both cards use the dual T1 module for connections to your carrier, the BCC3 is used only for T1/DS1's, and the PRI card is required when installing PRI's.
As far as the IP address of the cards, they can be changed, if needed, to meet your networking requirements.
|
|
|
|
|
Joined: May 2007
Posts: 218
Member
|
|
Member
Joined: May 2007
Posts: 218 |
Thank you guys.
It has been some time since we have tried to put a PRI in an EL.
Guess I gotta get a PRI card.
Located in Southern California.
Mitel, Avaya, Nortel and Hitachi Products and services for Hospitality and Business sectors. Tel: 1-800-329-7971
|
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
You don't have to look any further than down the turnpike!!
|
|
|
|
|
Joined: Feb 2010
Posts: 339
Member
|
|
Member
Joined: Feb 2010
Posts: 339 |
FYI everyone...
Just installed a PRI card in an EL and was able to make calls in and out but when an external call was placed on hold there was a horrendous squeal heard by the external caller. It sounded close to the fax squeal. It also blocked the MOH from going to the external caller even though it worked internally. Tried replacing the MCC & the DMP before the PRI card. It ended up being the PRI card.
I never tested on hold before with a PRI (shame on me) because normally I was interested that inbound and outbound calls routed properly but I will from now on.
Jon
"It is better to keep your mouth shut and appear stupid than open it and remove all doubt"
Mark Twain
|
|
|
|
Forums84
Topics94,516
Posts639,968
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
87
guests, and
38
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
