sundance-communications.com/forum Forums TDM Business Telephone Systems Mitel Telephones & Systems Mitel HX 5000 network alarms

Dose anybody know what alarms the admin phone will see from other nodes with the send/receive flags enabled?

First, do you have a manual?
2nd, if you do the message print manual will give you details.
3rd,
The actual network alarms are(225–244): These alarms indicate a system or voice processing problem
generated from a remote node. These alarms are handled the same as the local alarm is
handled. When a network alarm occurs, the local alarm (number) equivalent is displayed
on the first line of your administrator’s phone and the node where the alarm originated is
indicated on the second line. What distinguishes a network alarm from a local alarm is the
node information that appears on the second line of the phone’s display.
The actual alarm numbers 225–244 are used internally by the system and do
not appear on your administrator’s phone. Instead, your administrator phone
shows the equivalent local alarm number between 000 and 224.

Yes I have a manual and looked thur it, before we upgraded these sites that was 8 nodes networked with Axxess's v11.0 over P.T.P T1's and using a gateway to get the OAI all worked fine until we made them all HX 5000's v5.0 still using the P.T.P's but the systems are connected by IP now as the T1's are connected to routers on the customers network, the gateway is at v4.5 and I do not get any network alarms across nodes, worked with tech support and as you said only need the network system flags on for all sites.

I understand that the guy who originally designed that system is a genius.

Jeff, will you be able to log in there remotely when we get together tomorrow?