|
|
|
|
Joined: Nov 2004
Posts: 368
Member
|
|
Member
Joined: Nov 2004
Posts: 368 |
I am trying to do a fresh install on an icp 200. The unit has a premier rather large(on a hard drive) database and I want to do a basic install to use it to test a few ip phones. I created a 512 cf using the setup software for a fresh install. When I disconect the hd and plug in the cf card I get scriptfiledir/sysro/script/startup does not exsist. I have tried another cf card with the same results. Any suggestions. Thanks John
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 370
Member
|
|
Member
Joined: May 2005
Posts: 370 |
What type of CF card are you useing? Sandisck is the only ones i get to work, also did you do a quick format on the CF before installing the SW
Alex Kroger
Pinnacle Communications Corp
Mitel/Hitachi
Nationwide Hospitality Provider
|
|
|
|
|
Joined: Sep 2008
Posts: 392
Member
|
|
Member
Joined: Sep 2008
Posts: 392 |
Are you installing a 512 CF card in the internal slot and then putting the program CF in the external to do the install?
|
|
|
|
|
Joined: Nov 2004
Posts: 368
Member
|
|
Member
Joined: Nov 2004
Posts: 368 |
I am using a san disk 512 also tried a sandisk 1 gig. I used the format feature in the mitel setup program before I did the cf install.Tried 2 different software levels and same result. I think I am going to try something besides the basic choice to see if it will come up. I have never done this beefore so I am probably missing something simple and stupid.
I guess I can strip down the premier database as I did do a ftp bu file using filezilla but would rather leave the harddrive database alone.
|
|
|
|
|
Joined: Nov 2004
Posts: 368
Member
|
|
Member
Joined: Nov 2004
Posts: 368 |
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
|
|
|
|
|
Joined: Nov 2004
Posts: 368
Member
|
|
Member
Joined: Nov 2004
Posts: 368 |
2nd clean install cf (internal) was bad. I used 2 brand new san disk 512's and it went off with out a problem. Even with a good format when I loaded data to the disk I was using for the internal to test it I had some strange file charcters that looked like chinese. I have seen this before on alot of other systems mostly on debuts or svmi 4e units they usually fail a full format though. I should not have trusted the format before I turned to the techtalk board. I am really new to mitel so I doubted what I allready knew and it had to be something with the new system I am trying to learn about. Lesson learned don't forget the basics. Palm To forehead DOH. lol
|
|
|
|
Forums84
Topics94,515
Posts639,952
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
