|
|
Joined: Jan 2002
Posts: 1
Member
|
Member
Joined: Jan 2002
Posts: 1 |
had power failure,have three line on it,cant get dailtone,just get tone from ksu,but can get calls incoming fine?? Do you think ksu is fried,or what??
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Mar 2001
Posts: 338
Member
|
Member
Joined: Mar 2001
Posts: 338 |
I don't know anything about your system but if you can get ksu dialtone and calls coming in; then your system is not fried; most likely you have to do some reprogramming.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
The EK612 is a very old system that doesn't have much programming to it. If you can't get dial tone then how are you getting calls? I've put in and worked on the 612 and have never heard of a problem like yours. Can you give me a little more info. Then I can help you PS thanks for covering for me dialtone ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/forum/smile.gif)
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
Joined: Mar 2001
Posts: 577
Member
|
Member
Joined: Mar 2001
Posts: 577 |
That is usually a bad power supply....you can receive some calls,but not make any outgoing.You ought to be able to find one of these for almost nothing.I have had about 6 of them on the shelf for years.Used them for backups when the old 820,1236,2260 would crap out,at least I could get them some emergency service quick.
|
|
|
|
Joined: Dec 2005
Posts: 4
Member
|
Member
Joined: Dec 2005
Posts: 4 |
I have a Nitsuko ek 512 that was down recently. All unit are dead and a small green light is flashing located near the data protect and batt switches, Anyone knows the problem? Thanks a lot.
Edwin C (Wadab, Philippines)
|
|
|
Forums84
Topics94,516
Posts639,970
Members49,848
|
Most Online5,661 May 23rd, 2018
|
|
1 members (OBT),
112
guests, and
36
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|