web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#116338 07/12/04 01:41 AM
Joined: Apr 2004
Posts: 10
Member
OP Offline
Member
Joined: Apr 2004
Posts: 10
I have a ModKey with the 4 extra CO lines and 8 extra extentions. The system is in default opperation. I've wired up and installed two 60083s that work perfectly. I also have some 60080s and 1 60010B. Those will ring other extensions and will ring on incoming calls, but will not dial out. The buttons on the top of side of these phones seem to have line appearance but I never can get dial tone. I have no way of knowing if these phones are bad as all this equipment is second hand. Is there a key press sequence to get an external line with the 60080 and 60010B phone sets? Something other than pressing a line key?
Thanks

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#116339 07/12/04 03:56 AM
Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
Have you tried putting them on the two ports you say work, that will tell you if it's the phone or not. Also are you sure it is at default settings? There really isn't much to them as far as programming goes.

To be honest you are lucky it works at all, that baby is old. [Linked Image from sundance-communications.com]

You got mail.

[This message has been edited by dtmf (edited July 12, 2004).]


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
#116340 07/12/04 04:36 AM
Joined: Mar 2001
Posts: 3,268
Moderator-Allworx, Nisuko-Tie, Vodavi
Offline
Moderator-Allworx, Nisuko-Tie, Vodavi
Joined: Mar 2001
Posts: 3,268
I agree---there isn't too much to make this ModKey work---but you should have the Manual and make yourself familiar with the installation & operation. Was this equipment bought on E-Bay or donated to you?? When were the phones last tested good?? Sounds like bad phones but DTMF's suggestion will determine that. While you're testing---check out ALL the station ports to see if they are good.

#116341 07/12/04 06:39 AM
Joined: Aug 2002
Posts: 4,924
Likes: 1
Administrator
Offline
Administrator
Joined: Aug 2002
Posts: 4,924
Likes: 1
I thought the 83's work only om the DM16 with is a later ver of the Modkey?
Also the modkey co and station cards have modular plug type connections. Have you tried plugging the phone in directly on the card?

#116342 07/12/04 07:36 AM
Joined: Mar 2001
Posts: 3,268
Moderator-Allworx, Nisuko-Tie, Vodavi
Offline
Moderator-Allworx, Nisuko-Tie, Vodavi
Joined: Mar 2001
Posts: 3,268
Are you working with a ModKey BusCom 32?? A big blue steel sided cabinet---not the little plastic Modkey 616?? If your're working with that ModKey 32---how familiar are you with telephony & programming that beast?? That system can be very frustrating. About ten years ago, I got one up and going and said I would never touch one of theose rascals again.

#116343 07/12/04 07:39 AM
Joined: Apr 2004
Posts: 10
Member
OP Offline
Member
Joined: Apr 2004
Posts: 10
DTMF- I will try plugging into the two known good ports. I do actually have the manual (Amazingly enough) which says to key-in #*HOLDHOLD from station 01 before you do anything else this will initialize the system and default all the line access. It's almost as if the buttons for CO lines are acting like extention buttons??
JW- The system is from an apperantly working install. All the sets are from E-bay (They are kind of hard to find)The stickers on the KSU show 1990 as a test date and the phones show 1991 tests. I'll try all ports as well.
SSPhone- I think any of the 600NN series phones will work with this KSU? Not sure of the version how would I find this out. Also I've tried plugging direct to the KSU ports to no avail.

#116344 07/12/04 07:46 AM
Joined: Apr 2004
Posts: 10
Member
OP Offline
Member
Joined: Apr 2004
Posts: 10
I'm sure this is a 616. Just a little plastic blue thing I've mounted on the wall. Takes about the same space as three 66 blocks side-by-side.

#116345 07/12/04 07:57 AM
Joined: Apr 2004
Posts: 10
Member
OP Offline
Member
Joined: Apr 2004
Posts: 10
I do not have manuals for the for the handsets, they can be programed like a toshiba flexable button. I don't know how to do it, so maybe???
DTMF- My bad, the initialize sequence is on an orange sticker on the front of the manual and the KSU. It was unplugged more than 2 weeks I know but figured what the heck and did it anyway. That's correct for the pulse or tone setup. Did that too. Looked at the line access programming, but didn't mess with it since the first two sets worked. BTW all the sets came from the same place.

#116346 07/12/04 08:01 AM
Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
If it's a ModKey16 then it should be (# 98 HF/MIC)for initialization to Pulse
And (# 99 HF/MIC) to initialization to dtmf

They can use phone #'s 60015,60016,60020,60021,60025,60026,60030,60031,60010,60011



[This message has been edited by dtmf (edited July 12, 2004).]


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
#116347 07/12/04 08:06 AM
Joined: Mar 2001
Posts: 3,268
Moderator-Allworx, Nisuko-Tie, Vodavi
Offline
Moderator-Allworx, Nisuko-Tie, Vodavi
Joined: Mar 2001
Posts: 3,268
Okey-Dokey---you had me scared there for awhile. You've got the little ModKey--blue plastic with little square expansion cartridges that fit on the top of the main KSU with little ribbon cables. I don't think those 60080's series are going to work. I'll do some checking on this, but I think you have to stick with the 60010s & 11s(BusCom 16s) --60015s & 16s (Ultra Keys) --60020s & 21s (Meritors) --60030s & 31s (Delphis) I don't think the BusCom 32s (60080 series) work very well with that little ModKey---but I could be wrong. I'll do some checking in my old notes. Using my memory --I am at a loss.

Page 1 of 2 1 2

Moderated by  JWRacedog 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,097 Shoretel
187,703 CTX100 install
186,792 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
1 members (Curlycord), 100 guests, and 239 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5