sundance-communications.com/forum Forums Other TDM Phone Systems Nitsuko-Tie Telephones & Systems 124i Analog extension dont want direct to trunk

I have several 124i systems at different locations. In one location, I have an ASTRU card with analog extensions that pick up an outside trunk without dialing 9 first when going off-hook. Likewise, these extensions cannot call direct to other extensions, get a busy signal when they try. However, the digital station units CAN call direct to these analog extensions. The analog extensions are set as on-premise. What am I missing?

In recap, I want the analog extensions to be able to call other extensions, use park, etc. and require 9 to get outside line.

BTW, I have a CD-ROM of almost all of the manuals for the 28i/124i 384i/704i systems. If you want a copy, send me an email....

Thanks!
SERHouston

try making you "prime line" selection to intercom on those ext's. Currently even if the ext's grabs a outside line you should still be able to hookflash after going off hook and get intercom dial tone so that you can call internally. I could be wrong though.

Program 1008, enable number 2 and disable number 3. Thanks for your help serhouston.